Image

Technical Details

  1. HOME
  2. Technical Details

TECHNICAL SPECIFICATIONS

SR, NO. CHARACTERISTICS REQUREMENT AS PER ISO 13006 BIa / EN 176 BI a ISO / EN TESTING METHOD
A DIMENSION & SURFACE QUALITY
1 Deviation in Length & width Max. +/- 0.5% EN-98;IS:13630 (Part 1)
2 Deviation in thickness Max. +/- 5% EN-98;IS:13630 (Part 1)
3 Surface flatness (Warpage) Max. +/- 0.5% EN-98;IS:13630 (Part 1)
4 Rectangularity (Squareness) Max. +/- 0.5% EN-98;IS:13630 (Part 1)
B PHYSICAL PROPERTIES
1 Water Absorption >/= 10% EN-99;IS:13630 (Part 2)
2 Scratch Hardness of Surface (Mohs) Min. 3 EN-101;IS:13630 (Part 13)
3 Resistance to Surface Abrasion (of tiles intended for use on floors) Abration class shall be specified by the manufacturer EN-154;IS:13630 (Part 11)
4 Crazing Resistance Required EN-105;IS:13630 (Part 9)
5 Modulus of Rupture Min.153 Kg/cm2 EN-100;IS:13630 (Part 6)
C CHEMICAL / THERMAL PROPERTIES
1 STAINING RESISTANCE MIN CLASS 2 EN-122;IS:13630 (Part 8)
2 HOUSEHOLD CHEMICALS MIN CLASS B EN-122;IS:13630 (Part 8)
3 THERMAL SHOCK RESISTANT TO 10 CYCLES EN-104;IS:13630 (Part 5)
4 THERMAL EXPANSION MAX-9E-06 EN-104;IS:13630 (Part 5)
SR, NO. CHARACTERISTICS REQUREMENT AS PER ISO 13006 BIa / EN 176 BIa ISO / EN TESTING METHOD
A DIMENSION & SURFACE QUALITY
1 Deviation in Length ± 0.6% ISO-10545-2
2 Deviation in Thickness ± 0.5% ISO-10545-2
3 Straightness of Sides ± 0.5% ISO-10545-2
4 Rectangularity ± 0.6% ISO-10545-2
5 Surface Flatness ± 0.5% ISO-10545-2
6 Glosiness - GLOSSMETER
B STRUCTURAL PROPERTIES
1 Water absorption * < 0.5% ISO-10545-3
2 Density (g/cc) > 2 DIN 51082
C MASSIVE MECHANICAL PROPERTIES
1 Flexural Strength * > 27 N/mm ² ISO-10545-4
2 Breaking Strength * 1113 N ISO-10545-4
D SURFACE MECHANICAL PROPERTIES
1 Mohs hardness * > 6 EN 101
2 Abrasion resistance >175 mm ³ ISO-10545-6
3 Skid Resistance (Friction Coefficient) > 0.4 ISO-10545-17
E CHEMICAL PROPERTIES
1 Frost resistance Frost proof ISO-10545-12
2 Chemical Resistance No Damage ISO-10545-13
3 Stain Resistance Resistant ISO-10545-14
F THERMAL PROPERTIES
1 Thermal Shock Resistance No Damage ISO-10545-9
2 Thermal Expansion < 9 x 10-6 ISO-10545-8
3 Moisture Expansion Nil ISO-10545-10
SR, NO. CHARACTERISTICS REQUIREMENT AS PER ISO-13006/EN14411 GROUP Bla ISO / EN TESTING METHOD
A DIMENSION & SURFACE QUALITY
1 Deviation in length & width ± 0.5% ISO-10545-2
2 Deviation in thickness ± 5.0% ISO-10545-2
3 Straightness in side ± 0.5% ISO-10545-2
4 Rectangularity ± 0.5% ISO-10545-2
5 Surface flatness ± 0.5% ISO-10545-2
6 Color difference Unlterned ISO-10545-16
Glossiness ACCORDING TO SURFACE FINISH GLOSSOMETER
B STRUCTURAL PROPERTIES
1 Water Absorption < 0.50% ISO-10545-3
2 Density (g/cc) > 2.0 g/cc DIN 51082
C MASSIVE MECHANICAL PROPERTIES
1 Modulus of repture Min. 35 N/mm2 ISO-10545-4
2 Breaking strength Min. 1300 N ISO-10545-4
3 Impact resistance As per mfg. ISO-10545-5
D SURFACE MECHANICAL PROPERTIES
1 Surface abrasion resistance As per mfg. ISO-10545-7
2 MOH's hardness As per mfg. EN 101
3 Skid Resistance (Friction Coefficient) As per mfg. ISO-10545-17
E CHEMICAL PROPERTIES
1 Frost Resistance Frost Proof ISO-10545-12
2 Chemical Resistance No Damage ISO-10545-13
3 Stain Resistance Resistance ISO-10545-14
F THERMAL PROPERTIES
1 Thermal Shock Resistance No Damage ISO-10545-9
2 Thermal Expansion < 9 x 10-6 ISO-10545-8
3 Moisture Expansion Nil ISO-10545-10
SR, NO. CHARACTERISTICS REQUIREMEN As per 2556 (part I) 1994
1 CRAZING TEST No crazing up to 2 Cycle up to 5 hrs. Each Cycle up to 10
hrs. at pressure 0.34 to 0.37 Mps.
2 WATER ABSORPTION Average Value should not exceed more than 0.5%
3 MODULUS OF REPTURE Not less than 60 Mps.
4 CHEMICAL RESISTANCE No less than of the glaze when compared with control sample
5 RESISTANCE TO STRAINING & BURNING No stain shall remain on either of test piece
6 WAVY FINISH None on all visible surface
7 DISCOLORATION None on all visible surface